To power the skyLine Laser on or off, simply press and hold the power button for 3 seconds. The device will confirm the action with a beep or LED indicator so you know it's working properly. Note: A short press will not activate or deactivate the laser. Make sure to hold the button firmly for the full 3 seconds to avoid unintentional actions.
Setting up your skyLine Laser is quick and easy. Just follow the steps below to get ready for precision measurements: Remove the laser and components carefully from the protective case. Slide the riser holder tube into its designated slot until it aligns firmly in place. Use the screw clamp to securely attach the laser to a sturdy table or workbench. Screw the line holder onto the manual hand measurement tool. Make sure it's snug and centered.
The skyLine Hand Tool is your essential companion for precise line measurements. Below is a breakdown of each part: ① Handles: Grip and gently pull while measuring the glider lines. ② Button A: Press once to advance to the next line. Press twice quickly to repeat the current line measurement. ③ Button B: Reserved for future functionality or advanced features.
The skyLine Laser connects via Bluetooth to the we-measure.io website. Follow these easy steps: Turn on both the skyLine Laser and the Hand Measuring Tool by pressing and holding their power buttons for 3 seconds. Visit we-measure.io on your computer or mobile device, start measure a wing process, and click on the “Connect Laser” button.
Both the skyLine Laser and the Hand Measuring Tool use a standard USB-C connection for charging. Here's how to do it: 🔌 Connect a USB-C cable to the charging port on each device. 🔋 Plug the other end into a USB charger, power bank, or computer. ⏳ Charging time: Typically takes between 10 to 12 hours for a full charge.
The skyLine Hand Module uses a high precision digital scale that measures the exact pulling force in real time. This method is far more reliable and repeatable than traditional systems that rely on fixed counterweights hanging from the risers. Key Advantages of the Built-In Scale: Consistent pull force: The system automatically triggers a pre-measure at 3kg and a fixed measurement at 5kg, ensuring identical conditions every time.